Copper
Copper C11300
Buy MetalAnnealing Procedure
The annealing temperature for this alloy is between 900 and 1400 F.
Applications
Used for electrical components and commutator segments.
Cold Workability
The capacity for cold working this alloy is rated as "excellent".
Forgeability
The hot forgeability rating of this alloy is 65. (Forging brass = 100). The recommended hot working temperature for this alloy is between 1400 and 1600 F.
Hot Workability
This alloy's capacity for being hot formed is rated as "excellent".
Machinability
The machinability rating of this alloy is 20. (Where Alloy 360 FC Brass is 100).
Principle Design Features
Copper, STP, Tough Pitch with Ag. Has conductivity 101% IACS. Ductile, anneal resistant.
Weldability
Soldering is rated as "excellent", brazing is rated as "good", oxyacetylene welding is "not recommended", gas shielded arc welding is rated as "fair", coated metal arc welding is "not recommended", spot welding is "not recommended", seam welding is "not recommended" and butt welding is rated as "good".
Known Forms
Coil
Disc
Flat Bar
Foil
Hollow Bar
Pipe
Plate
Ring
Rod
Round Bar
Round Tube
Sheet
Square Bar
Strip
Additional Data
Specifications
B1,B116,B152,B172,B173,B174,B187,B188,B189,B2,B224,B226,B228,B229,B246,B272,B286,B298,B3,B33,B355,B442,B47,B470,B48,B49,B496,B5,B506,B623,B8,B-20292,B575,J461,J463,C11300Chemical Elements
| Copper | 99.9 nom |
| Remainder Total | Oxygen and trace elements may vary depending on th |
| Silver | 0.027 nom |
Physical Properties
Density: 0.322lb/in³
Electrical Resistivity: 10.4µΩ·cm
Mechanical Properties
Modulus of Elasticity – Tension: 17MSI